PTFE Mesh Conveyor Belt
Woven fiberglass mesh coated with PTFE emulsion — air flows through the belt, which matters for drying, curing and heat-shrink lines.
Construction
Layer order shown from working surface down to base.
How it is made
- 1 Woven fiberglass meshPTFE Mesh Conveyor Belt platform
- 2 PTFE emulsion coatingPTFE Mesh Conveyor Belt platform
- 3 Belts to specPTFE Mesh Conveyor Belt platform
Grades & Models
Select a model to view full technical parameters, chemical ratings, or request samples.
One platform, any mesh from 1×1 to 10×10mm.
| Model | Key spec | Typical use | Open |
|---|---|---|---|
| 6001 – 6015 | Mesh opening 1×1 to 10×10mm · Thickness 0.5–1.2mm · Width up to 4,000mm · Working temp -70~260°C, fireproof | Textile printing & drying; offset/UV curing | View → |
OEM Converting Capabilities for PTFE Mesh Belt
In-house precision slitting, custom rewinding, and joint fabrication tailored to your packaging machinery or industrial assembly lines.
Micro-slitting from 5mm up to full parent log widths with ±0.5mm edge tolerance.
1" and 3" PE / paper cores; yellow silicone release liners, dimpled PVC, or self-wound.
Supply 30m, 50m, 100m, or continuous master jumbo rolls for overseas converting distributors.
Pre-cut heating elements, circular pads, and custom gaskets supplied on easy-peel backing.
Where it works
Textile printing & drying
UV curing
Food baking & heat-shrink packaging
Questions on this line
Which mesh sizes are available? +
Open mesh from 1×1mm to 10×10mm; thickness 0.5–1.2mm, belt widths up to 4,000mm.
Is there a strength-reinforced option? +
Yes — model 6007 is woven with Kevlar alongside fiberglass for extra tensile strength.
Temperature range? +
-70~260°C, fireproof rated.
Selection & Troubleshooting Guides
Mesh belt openings: choosing between 1×1 and 10×10mm
On a PTFE mesh conveyor belt, the opening is the engineering decision. Everything else — coating, edges, joints — follows from what must pass through the belt and what must ride on top of it.
PTFE vs silicone coated fiberglass: how to choose
Both coatings sit on the same fiberglass platform and both survive temperatures that destroy ordinary fabrics. They are not interchangeable. The choice comes down to four measurable differences.
Not sure which ptfe mesh belt grade? Ask.
Tell us the machine, the temperature and the width — we answer with a grade recommendation, a price and sample availability.