Technical guides
Field notes from the coating line.
Selection guides and troubleshooting built on the factory's own published specifications — no invented test data.
Material selection September 20, 2026 · 5 min read
PTFE vs silicone coated fiberglass: how to choose
Both coatings sit on the same fiberglass platform and both survive temperatures that destroy ordinary fabrics. They are not interchangeable. The choice comes down to four measurable differences.
Read the guide →
Troubleshooting September 20, 2026 · 6 min read
Heat sealing tape: five failure modes and the grade that fixes each
When a packaging line starts producing bad seals, the tape is usually the first part replaced and the last part diagnosed. These are the five failure modes we see most, and the grade-level fix for each.
Read the guide →
Belting guide September 20, 2026 · 5 min read
Mesh belt openings: choosing between 1×1 and 10×10mm
On a PTFE mesh conveyor belt, the opening is the engineering decision. Everything else — coating, edges, joints — follows from what must pass through the belt and what must ride on top of it.
Read the guide →