6001 – 6015 PTFE Mesh Conveyor Belt
One platform, any mesh from 1×1 to 10×10mm.
Runs on: Drying ovens / UV curing / shrink tunnels.
Specification
| Mesh opening | 1×1 to 10×10mm |
|---|---|
| Thickness | 0.5–1.2mm |
| Width | up to 4,000mm |
| Working temp | -70~260°C, fireproof |
Verification & Compliance
ISO 9001 certified plant · SGS tested lines · RoHS & REACH compliant.
Construction
PTFE coated fiberglass mesh (6007: fiberglass + Kevlar)
Process
Weaving + PTFE emulsion coating
Applications for 6001 – 6015
Textile printing & drying; offset/UV curing
Paper & plastic printing drying; microwave drying
Food baking, refrigeration & heat-shrink packaging
Chemical & Environmental Resistance
Fluoropolymer (PTFE) and high-grade silicone platforms provide structural stability under harsh industrial chemical exposure and thermal cycling.
Chemical Acids & Alkalis
Inert / pH 0–14Resistant to concentrated sulfuric, nitric, and hydrochloric acids.
Organic Solvents & Oils
Zero SwellingImpermeable to ketones, alcohols, hydrocarbons, and industrial greases.
Flame Retardancy
UL94 V-0 RatedSelf-extinguishing non-flammable matrix; zero toxic smoke propagation.
UV & Weather Aging
100% WeatherproofUnaffected by continuous solar ultraviolet radiation or marine moisture.
Dynamic Friction
0.05–0.10 μUltra-low coefficient of friction prevents adhesive and melt buildup.
Thermal Shock Resistance
ΔT > 300°CMaintains mechanical dimensional stability across extreme cycling.
Compare within the PTFE Mesh Belt line
| Model | Thickness | Key spec | Typical use |
|---|---|---|---|
| 6001 – 6015This grade | 0.5–1.2mm | 1×1 to 10×10mm | Textile printing & drying; offset/UV curing |
Full data sheet for every grade on request.
Why this material here
Air flows through the belt
Open mesh lets moisture and solvents escape — faster drying, even curing, no steam pockets.
Fireproof at temperature
-70~260°C rated and fireproof for continuous oven and shrink-tunnel duty.
Kevlar option for high tension
Model 6007 weaves Kevlar with fiberglass where belt tension rules out standard mesh.
Quick FAQ
Which mesh sizes are available? +
Open mesh from 1×1mm to 10×10mm; thickness 0.5–1.2mm, belt widths up to 4,000mm.
Is there a strength-reinforced option? +
Yes — model 6007 is woven with Kevlar alongside fiberglass for extra tensile strength.
Temperature range? +
-70~260°C, fireproof rated.
Before you order 6001 – 6015
Send these five points with your inquiry and we quote the exact grade, width and price in one reply:
- Base material — fiberglass cloth or 100% PTFE film
- Thickness and working width your machine takes
- Continuous working temperature on your line
- Application — sealing, release, insulation or belting
- Certificates you need on file (ISO 9001 / SGS / FDA & LFGB scans)
Buyers of PTFE Mesh Belt also ask about
Quote 6001 – 6015 for your line.
Tell us the machine, the temperature and the width — we answer with a grade recommendation, a price and sample availability.